ASCO 8364A101H1911F1 - NO, Explosionproof Low Power Solenoid Valves -316L Stainless Steel Bodies 1/ 4 NPT, Pilot Operated

Features • Ideal for oil and gas control panel applications • Drop-in replacement design - compatible with most existing applications which eliminates the need to modify existing designs • Explosionproof Low Power ( 1.4 and 1.8 watt) solenoid options • Solenoid options with factory sealed leads ( 1.8 watt version) reduces installation time • UL and CSA approved for hazardous locations • Corrosion Resistant - 316L Stainless Steel valve material make it ideal for offshore and harsh environments • Rated for air, inert gas and sweet dry natural gas Nominal Ambient Temp. Ranges : Low Power DC: -10Ú F to 140Ú F ( -23Ú C to 60Ú C) Compact Low Power DC: -10Ú F to 200Ú F ( -23Ú C to 95Ú C) Approvals, Solenoid Only: UL & CSA Certified for Class I Div. 1 Locations Important These solenoid valves are intended for use on clean dry air, inert gas, or sweet dry natural gas filtered to 40 micron or better. The dew point of the media should be at least 10Ú C ( 18Ú F) below the minimum temperature to which any portion of the air, inert gas or sweet dry natural gas system could be exposed to prevent freezing. If lubricated air is used, the lubricants must be compatible with FKM and LT NBR elastomers. Instrument air in compliance with ANSI/ ISA Standard 7.0.01-1996 exceeds the above requirements and is, therefore, an acceptable media for these valves.